Posts Tagged ‘Hilo gauge India’

HI-LO Gage ::

Posted: October 12, 2012 in coating-corrosion
Tags:

Specification ::

Measures Internal Alignment, New Slim Design Is 30% Lighter

It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests.
Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability.The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.
Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons, 300 Tons

Mixing Apparatus

Laboratory Mixer for mixing of Bitumen for making different types of test specimens in the laboratory. The apparatus comprises the following: (I) A motor driven mixer which simultaneously imparts two motions to the mixing paddle i.e. revolving and planetary. A two speed gearbox is incorporated in the drive which makes the paddle revolve at approximately 140 and 285rpm with corresponding planetary motion of 62 and 125rpm respectively. (II) A stainless steel mixing paddle of the specified shape and dimension witch can be attached or removed easily. (III) A stainless steel mixing bowl of about 6Ltr capacity fitted with Heating Jacket for Heating of Sample at the Bottom of bowl with the thermostat controller. The mixing bowl can be held with the mixing apparatus and its height is adjustable. Suitable for operation on 220V, 1Ph, 50Hz AC Supply

 

Planatery Mixer-Morta Mixer ::

It is used for mixing cement pastes, mortars and pozzolanas.

Sailent Features ::

Specifications : The apparatus consists of an epicyclic type stainless steel paddle imparting both planetary and revolving motion, by means of gears. It has two speeds of 140 + 5 r.p.m. and 285 + 10 r.p.m. with planetary motions of approximately 62 r.p.m. + 5 r.p.m. and 125 r.p.m.+/-10 r.p.m. respectively. The stand of the mixer has arrangement to raise or lower the bowl. Complete with stainless steel bowl of about six litres capacity. Suitable for operation on 230 volts, 50 cycles, single phase, A.C.supply.

 

 

BABY MIXER(Half Bug Capacity) ::

Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1.1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½ h.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase.
For more details visit us at: http://www.hicoindia.com